Fresh water and salt water fly fishing in New Zealand and Australia. Brought to you by Riverworks waders, wading boots, vests, jackets, fly rods and reels.

Posts tagged “vests

Alex Broad – Season drawing to an end

Thats right, the 2011/2012 fishing season is nearly over.

For most of us we either stop fishing and start tying flies for the next season, head to winter spawning rivers and lakes that remain open or battle it out in the lower reaches of our favourite rivers.  I had realised I had been concentrating of salt water fly fishing this summer and hadn’t done enough trout fishing, so decided I needed to cram a bit of fishing in before the season closed.

Last weekend had me down at the local (Hutt River), after hooking into a beaut jack of around 4.5lb I was very quickly in trouble, he had run into the rocks under me and I could feel my leader on the rocks.  Determined not to loose this fish I ventured into the river to try and pull him out, it got deeper, and deeper, and a bad decision had me in water up to my neck doggy paddling across a short deep part, while holding the rod above my head, still firmly attached to the trout.  I landed him, but was rather wet and dejected, managing to drown a camera in the process, unfortunately no pictures for this reason.

This weekend, I had some time to kill on Sat morn, so thought Id have a quick look around some of the water that is due to close around Wellington.

It wasn’t long before I had spotted a fish feeding away, however he managed to disappear into the murky depths before I got a cast.  A few pools further up I had another fish in my sights, swaying gently in the current and feeding well, I tied on a special fly that rarely fails me.  A couple of casts to get the drift right and he swung over, the white flash of his mouth was the only indication I needed, I stuck hard before my indicator had a chance to move, fish on!  After a rather slow but dogged fight I had a nice conditioned jack in the net.

A few more pools and another fish was spotted, same rig cast and this time I had the cast perfect first time.  The fish swung, the mouth opened, the indicator dipped and I struck.  I was met with brief but solid resistance before the fly came screaming past my face.  The fish obviously disappeared into the heavy water not to be seen again.  Unfortunately that was it for the morning, another 1 fish day, but 1 fish is better than no fish, and going fishing is better than not going fishing.

Only a couple of weeks left in the season, Ill be making the most of it.


Alex Broad – Wading Jacket follow up

Hi guys,

First of all thank you all for your help and suggestions for the new wading jacket.  We really appreciate our customers input.

It appears we definitely have 2 very separate camps here, 1 for the wading jacket similar to what is already on the market and 1 for the more compact, simple, packable shell.   All I have to do now is convince Rob to do 2 jackets so everyone has an option!

I received a few jacket designs, which were all really good and well thought out.  Here they are:

From Calum McKenzie, a keen young fisherman and outdoorsman:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From Lisa McKenzie:

From Daren Gamble:

Thanks very much guys for all the effort you put in.

Everyone’s ideas have been taken into consideration and will form a check list to help us design a wading jacket for our customers.  The design process for this jacket will be blogged continuously and at every stage our readers will be included in the discussions and decisions relating to this.  We want you guys to see and be involved in everything from the concept right through to production.

Thanks again and keep an eye out next month for the initial concept sketches, we will need your votes!


Alex Broad – R Series Fly Reel, Part 2.

Couldn’t leave all the trout fishing brothers and sisters hanging out much longer, here are a few more details of the new “R Series” fly reels.

This reel has been the result of a long drawn out design process (well over 12 months), getting the balance of features and manufacture methods just right.

The aesthetics were inspired by the arrow head / dots we use in our Riverworks imagery, giving us a reel that looks a little different yet still retains its core look, feel and strength.

The R Series reel is machined from a solid billet of T6061 aluminium.  This alloy is commonly selected for use in heavy duty structures requiring good corrosion resistance, eg  truck and marine components, railroad cars, tank fittings, and high pressure applications.

R Series reels are Type 3 anodized, giving us the most durable wear and corrosion resistance available.  The Frame has been anodized matte black and the spool matte gun metal, producing an eye pleasing contrast look, without being too “blingy” for the South Islanders.

The prototype testing was awesome, we were seriously impressed.  This reel balances my rod perfectly and seems to have an uncanny knack of finding the fish (catching them is another story).  We have developed an “Orbit” cork and stainless drag, a combination of “brutal tippet snapping” stopping power and weight reduction to create a fantastic drag suited for all freshwater and light saltwater applications.  The “Orbit” drag is silky smooth with a nice click just to let your mates know your hooked up without being too ear piercing and annoying.

The large arbor spools reduce line memory and coiling, and also enable the angler to retrieve line quickly when that fish decides to run straight back at you!  The spools have been designed with a slight “V” which creates a little more room for backing as well as helping to align the line and backing on to the spool.

The reels will be available in 3 sizes, R1 = #3/4, R2 = #5/6 and R3 = #8/9.  While we don’t actually have the shipment in our hot little hands just yet, they are on the water and are expected to arrive very soon.

While this reel has been in development, another higher spec reel has also been developed.  However this one is way more technical so wont be ready for a while yet.  Expect a bomb to be dropped on the fly reel market this September…….


Alex Broad – Sneak preview

Here we go guys,

Riverworks is about to take possession of some very very hot reels………………

Just a wee teaser, more pics and details to come over the next day or 2.  Keep an eye out……..


Riverworks – Wading Jackets, help us out

With the end of 2011 drawing close its time to start looking ahead and revaluating the Riverworks product range for the 2012 – 2013 season.

The Tongariro wading jacket has served us well over the years. However, technology has changed and improved, new fabrics are available and styles and fashions are always evolving.  The Tongariro jacket is not dead! We are looking to create a new jacket to add to the range for the 2012 – 2013 season and we need your input!

While we fish as much as we can here at Riverworks and we use the gear we preach and sell, we aren’t everyone.  There’s nothing better than getting feedback and criticism from the people that are using our gear and making the purchasing decisions in the stores.

So here are a few questions to get the creative juices flowing in all your fish riddled brains:

What do you want in wading Jacket?

How can the Tongariro wading jacket be improved?

When do you wear a jacket, to stay warm? To stay dry? Both?

Do you wear a vest under or over your jacket? Or not at all when wearing a wading jacket?

What’s your style of fishing when wearing a wading jacket? Tongariro style? Rivermouth / rip? Back country? Multi day trips?

Do you see a market for a basic lightweight packable shell style jacket, tailored (short wading cut) for trout fishing?

How important is the length of a wading jacket? Should they be longer? Shorter?

What are the key features you look for in a wading jacket? Big pockets? Zingers? Fly patch? Water tight cuffs? Style?

What’s your colour preference? Does it really matter or influence your purchasing decision?

Is price an issue? Would you be prepared to spend more for a better jacket? Or is there a certain price point we should aim to hit?

Post a comment below with your suggestions, and hell, if you’re feeling artistic pinch the kids crayons and draw us a picture of your ideal jacket, email it through to me alex@evolveoutdoors.co.nz and if you don’t mind Ill even throw it up on the blog.

I might get in trouble giving the bosses stock away, but why don’t I run a little competition.  The 3 most creative designs sent in will receive a little something.  If it’s a really shit hot design I might even be able to persuade Rob to give away one of the new jackets to the winner……………..


Alex & Jack – The footage from the weekend

As promised, here is a bit of footage from our weekend.

Im pretty new to this whole video footage and editing thing, but it seems to have come together ok.  The fish aren’t huge, but it was a good day out in the bush.

Enjoy:


Alex Broad – S%!*s & Giggles

I wasn’t sure whether or not to post this video,

However after throwing it up on vimeo it was very quickly reblogged on a French fishing blog, and received over 150 hits in its first day and some very positive votes!

We were likened to Beavis and Butthead with all the giggling and praised with the down to earth style of fishing.

So here it is:

I have to add that after targeting wary brownies in clear water all season that this was a breath of fresh air, I haven’t had this much fun on a fly rod in a long time.  Perch are voracious feeders and will predate on just about anything, I tried to get them to eat a popper, they didn’t hesitate.  This has opened a new world of fly fishing up for me, popping for perch in “workups”.  Give it a hoon one day, you might be surprised just how much fun it is.